Iae Economy Cattle Crush

.The IAE classic calf creep feeder brings together the best elements of our previous calf creep feeder designs and enhances the product with new features and design alterations. The hopper, intricately folded from heavy gauge sheet using our state of the art folding and punching equipment, forms an integral part of the structure of the creep. Incorporating the hopper into the unit as a whole gives creep inherent rigidity and strength. To prove the durability and load capacity of the new creep feeder, it was tested with a payload in excess of 500kg in the 725 litre hopper, coping with ease and without sustaining any damage throughout the trial, which included transit and lifting using the (optional) top lifting frame, and the built in 3 point linkage and fork lift points. The MST AW600 MK2 is suitable for the shepherd handling a large flock (approx. 600 using an existing fence line/corner of a field) and is the ultimate sheep handling trailer manufactured by IAE. The core trailer unit of the AW600 also houses an integrated a weighing unit and is upgraded to include quick action twin gates, and dual action draft/shedding gates in the weigh unit. This system uses aluminium hurdles for weight reduction and easy handling, without compromising on strength

Uses:

Iae Economy Cattle Crush is designed to allow unobstructed access to animals flanks. It has a fully welded tapered tread plate floor to help keep the animal’s feet inside the crush when the side doors are open.

Features:

  • Saloon type doors at the front
  • Manual traditional lever operated yoke handle can be positioned on either side.
  • Spring loaded quick release adjustment on the yoke, gives 4 preset widths from 100mm to 250mm.
  • The front cage is made up of one fully opening side gate, a front gate and a fixed side panel giving access to the animals head from the front and one side only.
  • Bolted construction timber floor
  • Traditional backing up bar facility
  • Supplied with rear gate as standard
  • Three point linkage
  • Simple sliding access on one side only (top front quarter)
  • Spring loaded quick release adjustment on the yoke gives 4 pre-set widths from 90mm to 120mm.
  • The front cage is made up of one fully opening side gate, a front gate and a fixed side panel giving access to the animals head from the front and one side only.
  • Bolted construction timber floor.
  • Traditional backing up bar facility.
  • Bottom section lift off panel on each side.
  • No three point linkage included.

Specification:

  • Length: 2438mm
  • Width: 788mm
  • Internal Width: 688mm
  • Height: 1825mm
  • Weight (approx.): 282kg

Prices:

$1,159.06 – $8,556.03

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.