Electric Feed Grinder

Electric Feed Grinder 110v hammermill is an easy to use grinder that allows for at-home production of livestock feed. Includes grinder, bucket and 3 sieves (4, 6 and 8 mm). For grinding corn and other grains into more manageable sizes for livestock. Useful for producing small batches or mixing home blends of feed. Produces a coarsely ground flour for baking. 110v, 1.2 HP motor. 900 watts. Start-up draw 23.5 amps, working under load draw 9.47 amps. The bin for storing grain prior to grinding measures 17″ x 19″. The lower portion of the bin where the grain sits before processing measures 10-1/2″ x 9-1/2″. The base is 16-1/4″ off the ground. The opening where the processed grain drops out is 6-1/2″ x 2-3/4″. 110v allows it to be powered by any normal house outlet, no need for the installation of a 220v outlet. Save on the cost of the feed store mixing feed, make it at home the way your animals like it. Portable, only 30 lbs and can moved to where its needed when its needed.

Uses/benefits:

.1.Adopt international advanced technology, the careful design.

1.2.Crushing chamber is water model design, effectively eliminate the phenomenon of circulation in the process of crushing, rapid discharge.

1.3.Fully optimized arrangement of hammer, hammer sieve clearance can be adjusted, the transition of ordinary crushing and fine crushing.

1.4.The precision of detection, including high precision dynamic balancing, ensure the equipment running smoothly, lower noise, more ideal performance.

1.5.Innovation low-energy grinding way, tooth plate impact structure, “W” type secondary crushing structure, and enhance the friction crushing effect, reducing the grinding power consumption, production increased by 25%.

1.6.Can shift the full open door operation, the linkage type pressure screen, make the operation more humanized and more convenient.

1.7.Key parts imported, make its service life is longer, the maintenance cost is low.

1.8.Special processing of cemented carbide tool bit hammer. 

Features:

  • 110v hammermill is an easy to use grinder that allows for at-home production of livestock feed.
  • Includes grinder, bucket and 3 sieves (4, 6 and 8 mm).
  • For grinding corn and other grains into more manageable sizes for livestock.
  • Useful for producing small batches or mixing home blends of feed. Produces a coarsely ground flour for baking.
  • 1 year limited warranty on manufacturer’s defects. Abuse and neglect are not covered.

Specification:

ModelPower(KW)Capacity(T/H)Rotor diameter(MM)
SFSP112*30C55/755-101120
SFSP112*38C90/11010-15
SFSP112*50C132/16015-25
SFSP112*75C200/220/25025-35
SFSP112*100C250/280/31535-50
SFSP138*30C75/9010-151380
SFSP138*38C110/13215-20
SFSP138*50C160/20020-30
SFSP138*75C220/25030-40
SFSP138*100C300/35040-55

Prices of Electric Feed Grinder:

$5,500.00 – $20,000.00

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.