If your Eheim filter is not pumping water, you might be able to fix the problem yourself. First, check that the suction cups are attached properly to your aquarium and that they are not cracked or broken. If they are damaged or worn out, replace them with new ones. If the suction cups are in good condition but still do not hold onto the tank, try using a different type of suction cup. Different types of suction cups have different strengths and may be more effective than others at attaching to your particular aquarium.

Check the power cord on your filter to make sure it is plugged in properly and working. If you have an extension cord, make sure it is fully plugged into both ends of itself as well as into an outlet. If this does not work and there is still no water coming out of your filter, check for clogs inside the unit by cleaning out any debris that has collected inside of it with a toothbrush or other small brush (depending on what kind of filter you have).

Eheim Filter Not Pumping Water is a common condition in the Eheim filter. The Eheim brand has been in the market for a long time and has garnered an excellent reputation because of its efficiency and durability. These filters are made with exceptional workmanship that you can count on to last for years. However, some factors may cause this product to experience malfunctions, which will lead to poor water quality output. Here are the most common issues with Eheim filters that cause them to fail at filtering water properly:

Description of Eheim Filter Not Pumping Water

The Eheim filter not pumping water is a common issue that can be caused by many different factors. The most common cause of this problem is a faulty pump or impeller, which can be easily remedied by replacing the part.

Types of Eheim Filter Not Pumping Water

There are several types of Eheim filters not pumping water.

  • The first type is called a “brushless motor”. These motors have no brushes and are generally used in high-end filters. They can be found on some models, such as the Eheim Classic series, and many of the professional lines filters like the classic 2217 model or any of their other professional models. These motors require very little maintenance so they last longer than other motor types, but they also tend to be more expensive and less powerful when compared to standard motors that use brushes.
  • Another type is called an “AC induction motor” and is often found in many of Eheim’s lower-end power filters such as their popular AquaClears or even some of their older models like 2513 or 2913 which were released back in 2008/2009. These AC induction motors usually only work well with aquariums up to about 50 gallons since they aren’t very powerful compared with standard DC pumps found on most other filter systems from companies like Fluval or Aqueon Heartland (which I’ve been using for over 10 years now).

Blocked intake and output tubes

  • Check for blockages: Remove the intake and output tubes from the filter, then check them for blockages. If you find any obstructions, remove them with a pair of tweezers or needle-nose pliers.
  • Check for leaks: After removing any blockages from your intake and output tubes, turn on your filter again and look for leaks in either tube. If there are no leaks visible in either tube, it’s time to replace them.

Faulty electric motor

The first thing you should do is check the power cord. Make sure it’s securely plugged into the outlet and that your filter pump is plugged into a working outlet. If you have an extension cord, make sure that it too hasn’t come loose from its connection at either end.

Next, check to see if there’s any damage to the plug or socket where you’re plugging in your filter pump. If so, this may prevent electricity from flowing through and powering up your pump motor properly. Your best bet here is probably going to be replacing both parts—the plug and outlet—and seeing how that goes before moving on to other troubleshooting options.

If none of these issues seem related (or if you’ve already ruled out problems with power sources), then proceed onward for more definitive solutions.

Faulty impeller

The most likely cause of a filter not pumping water is a broken impeller. The impeller is the part that actually pumps the water through the filter, so if this is damaged or broken, you will not get any flow from your filter. The impeller is located inside the motor housing and has three blades around its perimeter which rotate in order to move water through the unit. It looks like a small cylinder with plastic blades attached to it. If you notice any damage to your impeller, replace it immediately before continuing with troubleshooting other parts of your aquarium setup.

Specifications of Eheim Filter Not Pumping Water

The Eheim Filter Not Pumping Water measures 18 x 14 x 10 inches and weighs 8 pounds. It has an ampere rating of 5.1 and requires a voltage of 120 volts, 60 hertz, and a power rating of 1.3 watts. The RPM is 250, while the capacity is 500 gallons per hour with a maximum flow rate of 200 gallons per hour and a maximum head of 20 feet. The wattage is 0.7 watts, while the flow rate is 0-100 microns (0-100 millimeters).

Maintenance of Eheim Filter Not Pumping Water

If you have an Eheim filter, it’s important to remember that it’s not self-sustaining. You’ll need to keep your filters clean and occasionally change the filter media. When you first notice a drop in water flow, check to see if the impeller is dirty or damaged. If so, replace it before returning the filter back into operation.

If your pump continues to run but doesn’t move any water through the filter, check inside of the tank for a blockage caused by debris or plant matter that has been collecting over time in areas where you can’t get at it easily–behind pipes or around corners of tanks with removable tops or sides that don’t allow for easy access for cleaning purposes (such as with glass aquariums).

Price of Eheim Filter Not Pumping Water

The Price of Eheim Filter Not Pumping Water is $4,999.99 USD. The price of Eheim Filter Not Pumping Water in India is Rs. 33000/- INR, it may vary from one state or city to another. The price of Eheim Filter Not Pumping Water in the USA is $5,000 USD and in the UK it’s £1,906 GBP (GB Pound). The cost of Eheim Filter Not Pumping Water in Canada is CAD 599 (Canadian Dollar).

In Conclusion

Eheim filters are among the most popular aquarium filters available. Their high quality and reliability make them a great choice for both beginners and professionals alike. They can be trusted to keep your water clean and your fish happy. But even with all of their advantages, there are still some issues that might arise if you don’t maintain it properly or if something goes wrong in the manufacturing process. Luckily, most problems can be easily fixed by following our tips above: clean out any debris from inside the filter housing with a toothbrush before replacing it on its base, and check that all valves are working as they should (if not then replace/repair them), ensure that any tubing running through walls is secured tightly so there aren’t leaks coming into contact with electrical wiring which could cause a short circuit – this could also cause damage over time due to rusting which could result in premature failure of components. A good way to prevent rust forming on metal parts is by using a silicone sealant such as WD40 (this will help prolong life expectancy).

Leave a Comment

Your email address will not be published.

error: Content is protected !!